EB2410ITX User Guide

Simtec Electronics

B J Dooks

V R Sanders

  • ARM® is a registered trademark of ARM Limited.

  • LINUX® is a registered trademark of Linus Torvalds.

  • UNIX® is a registerd trademark of The Open Group.

  • All other trademarks are acknowledged.

The product described in this document is under continuous development and improvement. All descriptions of usage and particulars of the product are given in good faith by Simtec Electronics. However all warranties expressed or implied, including but not limited to implied warranties or merchantability, or fitness for purpose, are excluded.

While every precaution has been taken in the preparation of this book, the publisher assumes no responsibility for errors or omissions, or for damages resulting from the use of the information contained herein.

Revision History
Revision 1.0118th September 2007VRS

Add video section to hardware chapter.

Revision 1.0026th August 2005VRS

Initial Release.

Table of Contents

EB2410ITX Development Board
1. Overview
1.1. Kit contents
1.1.1. CD-ROM
1.1.2. EB2410ITX Development board
1.2. Development Tools
1.3. Using the development board
1.4. Handling precautions
2. Hardware Description
2.1. Overview
2.2. Samsung S3C2410 SOC
2.3. Serial port
2.4. Real Time Clock
2.5. JTAG
2.6. Memory
2.6.1. NOR boot flash
2.6.2. SDRAM
2.6.3. EEPROM
2.7. Super IO controller
2.8. Power Supply
2.9. DM9000 Network controller
2.10. PC104 expansion connectors
2.11. Video output
3. Bootloader
3.1. Overview
3.2. Getting Started
3.2.1. Using hyperterm as a serial console
3.2.2. Using minicom as a serial console
A. Board Layout
B. Component Identification

List of Figures

2.1. Detailed block diagram of the EB2410ITX
2.2. External 9way D Serial connector
2.3. JTAG connector
2.4. NOR flash to S3C2410 attachment
2.5. SDRAM to S3C2410 attachment
2.6. 20 pin MOLEX 39-29-9202 ATX power connector
2.7. 20 pin auxiliary SIL power connector
2.8. DM9000 to S3C2410 attachment
2.9. PC104 Expansion connector
2.10. Video system connections
3.1. Hyperterm settings window
3.2. Hyperterm displaying ABLE output
3.3. Minicom settings window
A.1. EB2410ITX board connector and link locations
B.1. EB2410ITX top side component identification

List of Tables

2.1. JTAG connector PL18
2.2. ATX power connector pinouts PL23
2.3. SIL power connector pinouts PL24
2.4. Typical power usage
2.5. PC104 expansion connector PL13

List of Examples

3.1. Video display after starting ABLE on EB2410ITX
3.2. Serial display after starting ABLE on EB2410ITX