OKI 675001 Module Application Notes

AN0001 - Four Port Serial Adapter for the EB675001DIP

Fully realised project

This application note describes the addition of a quad serial controller to the EB675001 Module.


AN0002 - Attaching an LCD module to the EB675001DIP

3D board view for the LCD module to EB675001DIP application note

This application note describes the addition of a HD44780 type LCD module to a EB675001DIP module.

AN0004 - IDE interface for the EB675001DIP

3D rendering of the board

This application note describes the addition of a parallel IDE port to the EB675001DIP module

AN0005 - Three channel H bridge motor driver for the EB675001DIP

3D board view for the EB675001DIP three channel pwm motor driver

This application note describes the connection of three H bridge drivers to the EB675001DIP module.

AN0007 - Attaching a GPS module to the EB675001DIP

3d view of the board

This application note describes the addition of a GPS reciver to the EB675001DIP Module.

AN0013 - TV video output for the EB675001DIP

Completed real AN0013 circuit board

This application note describes creating a dumb framebuffer with PAL composite TV output. It uses a minimal number of additional components above an SRAM to store the video data and a shift register for the output.

AN0014 - Acessing General Purpose I/O from Linux

This application note describes how General Purpose Input/Output (GPIO) pins may be manipulated, from Linux, on various Simtec products.

Other pages